Floor-laying robot technology: the P-Series
Our proprietary robotic platform digitizes and automates interior finishing on site, with accuracy within 1/32 in.
Technology pillars
Accuracy within 1/32 in
Unlike conventional mobile robots, Autolay lays every piece to within 1/32 in. Each placement is corrected against the room as it is laid, not measured afterwards.
- Placement within 1/32 in
- Corrected per piece
- Laid to plan
Quality control by artificial intelligence
Open joints and misalignment are caught during installation, not at handover. The system generates digital quality reports compliant with DIN standards automatically.
- In-process detection
- DIN-compliant reports
Rapid deployment
Tool-less assembly allows the robot to be transported in standard vehicles. Operators use a web interface that reads IFC building models directly for automatic layout generation.
- Tool-less
- Fits a standard van
- Reads IFC building models
Safety by design
A hardware emergency stop cuts power to the drive and the tools, and the robot works in a room closed to unsupervised people. The CE conformity assessment under the European Union Machinery Regulation is in progress.
- Emergency stop
- Closed work zone
- CE assessment in progress
Hardware concept: P-Series
The P-Series is designed for heavy-duty construction environments while remaining lightweight enough for standard transport.
Material deck for the element stack
Drive base with battery
Gripper on the end effector
Modules swap tool-less on site — base, deck and arm come apart for transport.